TPO FPA Sintofoil Membranes

TPO FPA Sintofoil Membranes

TPO / FPO SINTOFOIL membrane for waterproofing roofs

Product description:

Synthetic TPO/FPO waterproofing membrane produced by extruding a UV resistant thermoplastic elastomer, olefin and flexible, out of polypropylene, reinforced with a layer of polyester mesh. The membrane has contrasting colors on its upper and lower faces, providing a signal layer so that any damage occurred during or after installation will be immediately visible. Available in REFLECTA ALB with upper membrane (top) manufactured with the REFLECTA WHITE treatment, mass developed, covering the entire top layer of reinforcement.

This process improves the reflection and emission characteristics conferring waterproof coating. Solar Reflectance Index (SRI) reaches 102%. RT SINTOFOIL membranes comply CE standards.

Usage: Waterproofing membrane for exposed flat roofs

Features / Benefits

  • High resistance to weathering, including UV radiation
  • High resistance to aging
  • High resistance to hail
  • High resistance to environmental factors
  • High resistance to mechanical stress
  • High resistance to tension
  • Very good low temperature flexibility
  • High permeability to water vapor diffusion

Approvals / Standards :

  • QMS ( Quality Management System ) – ISO 9001
  • CPR305/2011 / EU certified by and approved with the CE mark
  • LEED Certification
  • ISO 14001 ; OHSAS 18001
  • IMPER ITALIA – GBC member ( Green Building Council ) ITALY

Colors:
Topcoat: grey, black, white

Conditions / Shelf-Life:
The rolls must be stored in a horizontal position on pallets and protected from direct sunlight, rain and snow. The product does not expire if stored correctly. Do not stack the pallets during transportation or storage.

Products
SINTOFOIL RT 1.2 mm 2.10 m x 25 m
SINTOFOIL RT 1.5 mm 2.10 m x 25 m
SINTOFOIL RT 1.8 mm 2.10 m x 20 m
SINTOFOIL RT 2.0 mm 2.10 m x 20 m

About the Author

Rikko Steel administrator

Comments Are Closed!!!
NEED MORE INFORMATIONS?
* indicates required field