Fibre-cement boards
Fibre-cement tiles (non-asbestos) are intended for residential and non-residential buildings, inns, stables and for any structure that needs a roof. Fibrocement products are safe and resistant over time, have low heat conductivity, significant resistance to frost, fire protection (they belong to the group of non-flammable materials). The tiles are resistant against weathering, high and low temperatures, solar radiation, low humidity, snow, are anti-corrosive and do not rot. Fibre-cement boards provide protection against noise, rain and wind. The boards do not condense so you do not need a vapor barrier. They are easy to install and economical. Keeping the roof is a simple matter and does not require significant additional costs.
Characteristics
- Lifespan of over 50 years;
- The heating temperature – is not regulated;
- Hitting while loading – is not permitted;
- The chemical action of alkaline solutions – allowed;
- The chemical action of acid solutions – not allowed;
- Weight – 14-20 kg/m²;
- The minimum allowed inclination – 10 % (10 cm inclination / 1 m of length)
General characteristics
| Fibre-cement boards | Values |
| Size (lenght, width, thickness), mm | 1750 X 1130 X6,1 / 1000 X 1130 X 5,8 |
| Height of undulations, mm | 40 |
| Step of undulations, mm | 150 |
| No. of undulations | 8 |
| Usable surface, m² | 1750 X 1130 X6,1 – 1,6m2 / 1000 X 1130 X 5,8 – 0,88 m² |
| Board weight, kg | 1750 X 1130 X 6,1 – 21,5kg / 1000 X 1130 X 5,8 – 12,5kg |
| Number of tiles per pallet, pcs | 107 |
OSB 3
These are plates made by pressing the three pieces of wood glued with synthetic resin and oriented in different directions. The different positioning of the outer layers strands regarding the core, the special geometry of the strands and a high degree of orientation in the outer layers provide the best technical features and good looks. OSB are used in wood constructions and houses, construction of scenes and shops, concrete formwork and interior design.
OSB plates containing 90% natural wood. They are made from specially selected pine, harvested mainly in the process of thinning the forest.
OSB 3 sizes and types
| Format, mm | Thickness, mm | Plates / pallet | Pallet height, mm | Gross weight, kg | Pallets / truck |
| 2500×1250 | 10 | 100 | 1050 | 2126 | 10 |
| 2500×1250 | 12 | 85 | 1070 | 2130 | 10 |
| 2500×1250 | 15 | 70 | 1100 | 2126 | 10 |
| 2500×1250 | 18 | 60 | 1130 | 2152 | 10 |
| 2500×1250 | 22 | 50 | 1150 | 2157 | 10 |
*±5% kg deviation
Usage:
There are three main use of OSB:
Construction
– external and internal wall panels, attics;
– in the floor manufacturing process, linoleum support;
– in manufacturing of formworks;
– roofing;
– production of wall panels;
– temporary fencing and temporary buildings;
– used for decoration, interior decoration, etc.
Furniture industry
– production of furniture panels;
– production of wardrobes, closets, nightstands, tables, drawers, shelves, etc.;
– production of upholstered furniture frames, etc.
– as a substitute for timber, etc.
Production of containers and packing
– the production of containers for transportation, as a supplement in the packaging process;
Primer no. 1 (solvent based)
Bituminous primer – solvent based
PRIMER NO. 1 is a bitumen primer based on high quality bituminous and specially selected organic solvents that can be used to treat the support surface before waterproofing with bituminous membranes.
PRIMER NO. 1 is applied to the porous surfaces to improve the adhesion of the impervious element to the substrate.
Features / Benefits:
- Quick drying
- It can be used at temperatures below zero
- Highly penetrability
Bituminous primer works by blocking dust and by closing the pores of the concrete surface.
The product is ready to use and requires no dilution.
To get the best results, the support substrate must be clean, without oil stains, grease, puddles or other particles.
The product can be applied by brush, roller, spray or splash.
Coating surface: 0.25 – 0.35 l / m2 ( 1 l primer = 3.33 m2 )
Store in a dry place, protected from sunlight at a temperature between -20 ° C and + 30 ° C. Guaranteed shelf life – 12 months.
| Products | |
| PRIMER NO. 1 | 10 l ( bucket ) |
| PRIMER NO. 1 | 20 l ( bucket ) |
Aquamast (water based)
Water based bituminous primer
AQUAMAST is a bituminous primer made from high quality water-based bitumen, which can be used to treat the support surface before waterproofing with bituminous membranes.
AQUAMAST is applied to the porous surfaces to improve the adhesion of the impervious element to the substrate.
Features / Benefits:
- Forms a waterproof monolith
- Leak safe
- Increases the roof lifespan
The bituminous primer works by blocking dust and by closing the pores of the concrete surface.
The product is ready to use and requires no dilution.
To get the best results, the support substrate must be clean, without oil stains, grease, puddles or other particles.
The product can be applied by brush, roller, spray or splash.
Coating surface: 0.25 – 0.35 l / m2 ( 1l primer = 3.33 m2 ).
Store in a dry place, protected from sunlight at a temperature between -20 ° C and + 30 ° C. Guaranteed shelf life – 12 months.
| Products | |
| AQUAMAST | 10l ( bucket) |
| AQUAMAST | 18l ( bucket) |
Vapor barrier – PE foil
Vapor diffusion control layer
Product description:
TECHNONICOL vapor barrier is a layer of vapor diffusion control, without the additional support layer, made out of low-density polyethylene (PE).
Usage: The vapor control layer is used for flat roofs (only for PVC membrane systems).
Features / Benefits
- Installation is easy and fast
- High life span
- It remains flexible at low temperatures
- Does not deteriorate over time
- Consistent resistance to water vapor diffusion
- It is recommended for all types of PVC membranes
- Recyclable product
Colors:
Topcoat: yellow
Underlayer: yellow
Conditions / Shelf-Life:
The rolls must be stored in a horizontal position on pallets and protected from direct sunlight, rain and snow. The product does not expire if stored correctly. Do not stack the pallets during transportation or storage.
| Products | ||
| Vapor barrier ( PE foil ) | 0.20 mm | 3 m x 100 m |
TPO FPA Sintofoil Membranes
TPO / FPO SINTOFOIL membrane for waterproofing roofs
Product description:
Synthetic TPO/FPO waterproofing membrane produced by extruding a UV resistant thermoplastic elastomer, olefin and flexible, out of polypropylene, reinforced with a layer of polyester mesh. The membrane has contrasting colors on its upper and lower faces, providing a signal layer so that any damage occurred during or after installation will be immediately visible. Available in REFLECTA ALB with upper membrane (top) manufactured with the REFLECTA WHITE treatment, mass developed, covering the entire top layer of reinforcement.
This process improves the reflection and emission characteristics conferring waterproof coating. Solar Reflectance Index (SRI) reaches 102%. RT SINTOFOIL membranes comply CE standards.
Usage: Waterproofing membrane for exposed flat roofs
Features / Benefits
- High resistance to weathering, including UV radiation
- High resistance to aging
- High resistance to hail
- High resistance to environmental factors
- High resistance to mechanical stress
- High resistance to tension
- Very good low temperature flexibility
- High permeability to water vapor diffusion
Approvals / Standards :
- QMS ( Quality Management System ) – ISO 9001
- CPR305/2011 / EU certified by and approved with the CE mark
- LEED Certification
- ISO 14001 ; OHSAS 18001
- IMPER ITALIA – GBC member ( Green Building Council ) ITALY
Colors:
Topcoat: grey, black, white
Conditions / Shelf-Life:
The rolls must be stored in a horizontal position on pallets and protected from direct sunlight, rain and snow. The product does not expire if stored correctly. Do not stack the pallets during transportation or storage.
| Products | ||
| SINTOFOIL RT | 1.2 mm | 2.10 m x 25 m |
| SINTOFOIL RT | 1.5 mm | 2.10 m x 25 m |
| SINTOFOIL RT | 1.8 mm | 2.10 m x 20 m |
| SINTOFOIL RT | 2.0 mm | 2.10 m x 20 m |
Logicroof PVC Membranes
PVC membrane for waterproofing roofs
Product description :
LOGICROOF V-RP is a synthetic PVC membrane for high quality waterproofing roofs, reinforced with polyester fiber, in accordance with EN
Usage: Waterproofing membrane for exposed flat roofs
Features / Benefits
- High resistance to weathering, including UV radiation
- High resistance to aging
- High resistance to hail
- High resistance to environmental factors
- High resistance to mechanical stress
- High resistance to tension
- Very good low temperature flexibility
- High permeability to water vapor diffusion
- Good welding properties
- Weldable
- Recyclable
Approvals / Standards
- Reaction to fire according to EN 13501-1
- Exposure to exterior fire tested in accordance with ENV 1187 and classified according to EN 13501-5: BROOF(t1), BROOF(t2) BROOF(t3)
- Polymeric sheets for roof waterproofing according to EN 13956, certified by 1023-CPR-0469 F and approved with the CE mark.
- Monitoring and assessment by approved laboratories
Colors
Topcoat: light grey
Underlayer: dark grey
Conditions / Shelf-Life:
The rolls must be stored in a horizontal position on pallets and protected from direct sunlight, rain and snow. The product does not expire if stored correctly. Do not stack the pallets during transportation or storage.
| Products | ||
| LOGICROOF V-RP | 1.2 mm | 2 pcs x 1.025 m x 25 m |
| LOGICROOF V-RP | 1.2 mm | 2.05 m x 25 m |
| LOGICROOF V-RP | 1.5 mm | 2 pcs x 1.025 m x 20 m |
| LOGICROOF V-RP | 1.5 mm | 2.05 m x 20 m |
| LOGICROOF V-RP | 1.8 mm | 2.05 m x 15 m |
| LOGICROOF V-RP | 2.0 mm | 2.05 m x 15 m |
Logicroof Colored PVC membrane
PVC membrane for waterproofing roofs
Product description:
LOGICROOF V-RP is a synthetic PVC membrane for high quality waterproofing roofs, reinforced with polyester fiber, in accordance with EN
Utilizare: Waterproofing membrane for exposed flat roofs
Features / Benefits
- High resistance to weathering, including UV radiation
- High resistance to aging
- High resistance to hail
- High resistance to environmental factors
- High resistance to mechanical stress
- High resistance to tension
- Very good low temperature flexibility
- High permeability to water vapor diffusion
- Good welding properties
- Weldable
- Recyclable
Approvals / Standards
- Reaction to fire according to EN 13501-1
- Exposure to exterior fire tested in accordance with ENV 1187 and classified according to EN 13501-5: BROOF(t1), BROOF(t2) BROOF(t3)
- Polymeric sheets for roof waterproofing according to EN 13956, certified by 1023-CPR-0469 F and approved with the CE mark.
- Monitoring and assessment by approved laboratories
Colors
Topcoat:
white ( RAL 9001 )
green ( RAL 6011 )
blue ( 5010 )
red ( RAL 3016 )
dark grey
Underlayer: dark grey
Conditions / Shelf-Life:
The rolls must be stored in a horizontal position on pallets and protected from direct sunlight, rain and snow. The product does not expire if stored correctly. Do not stack the pallets during transportation or storage.
| Products | ||
| LOGICROOF V-RP | 1.2 mm | 2.05 m x 25 m |
| LOGICROOF V-RP | 1.5 mm | 2.05 m x 20 m |
| LOGICROOF V-RP | 1.8 mm | 2.05 m x 15 m |
| LOGICROOF V-RP | 2.0 mm | 2.05 m x 15 m |
Underground waterproofing membranes
PVC membrane for waterproofing undeground structures
Usage:
LOGICROOF TSL is a PVC membrane reinforced with different colored faces, for use in tunnels and underground structures
Caracteristici
- High resistance to aging
- High resistance to tension and elongation
- High resistance to mechanical impact
- High dimensional stability
- Resistance to root penetration and microorganisms
- Resistance to agressive natural environments in groundwater and soil
- High flexibility at low temperaturese
- Can be installed on damp support substrates
Colors
Topcoat: yellow (signal layer)
Underlayer: dark grey
| Products | ||
| LOGICROOF T-SL | 1.5 mm | 2.0 m x 20 m |
| LOGICROOF T-SL | 2.0 mm | 2.0 m x 20 m |
APP 0
ECOFLEX is a range of membranes based on distilled bitumen modified with high quality elastomeric polymers (APP), composite reinforced with polyester mat (P) and glass fibers twisted longitudinally or with a fiber glass mat in which the fiberglass is twisted longitudinal (V).
The altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility and durability.
ECOFLEX P and PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
ECOFLEX V and VA provide good dimensional stability, being used as a base coat or top coat in bi- or multilayer works (V + PA sau P+ VA).
ECOFLEX PA and ECOFLEX VA membranes are delivered with mineral granules superior finish. This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application. The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
Usable domains: mild complexity works, concrete flat roofs, foundations, vapor barriers, etc.
| Products | ||||
| 0⁰ APP | ECOFLEX | V 2.0 kg/m2 | V 2.6 kg/m2 | V 3.0 kg/m2 |
| 0⁰ APP | ECOFLEX | VA 3.5 kg/m2 | VA 4.0 kg/m2 | VA 4.5 kg/m2 |
| 0⁰ APP | ECOFLEX | P 3.0 kg/m2 | ||
| 0⁰ APP | ECOFLEX | PA 4.0 kg/m2 | PA 4.5 kg/m2 | |
APP -5
PRIMA PLAST is a range of membranes based on distilled bitumen modified with high quality elastomeric polymers (APP), composite reinforced with polyester mat (P) and glass fibers twisted longitudinally or with a fiber glass mat in which the fiberglass is twisted longitudinal (V).
The altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility and durability.
PRIMA PLAST P and PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
PRIMA PLAST V and VA provide good dimensional stability, being used as a base coat or top coat in bi- or multilayer works (V + PA sau P+ VA).
PRIMA PLAST PA and PRIMA PLAST VA membranes are delivered with mineral granules superior finish. This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application. The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
Usable domains: mild complexity works, concrete flat roofs, foundations, vapor barriers, etc.
| Products | ||||
| -5⁰ APP | PRIMA PLAST | V 2.5 kg/m2 | V 4.0 kg/m2 | V 5.0 kg/m2 |
| -5⁰ APP | PRIMA PLAST | VA 5.0 kg/m2 | ||
| -5⁰ APP | PRIMA PLAST | P 3.6 kg/m2 | P 4.0 kg/m2 | P 5.0 kg/m2 |
| -5⁰ APP | PRIMA PLAST | PA 4.5 kg/m2 | PA 5.0 kg/m2 | |
SBS – 10
MIDA STANDARD is a range of membranes based on distilled bitumen modified with elastomeric polymers (SBS) and thermo-adherent additives. The reinforcement is made out of polyester (P) reinforced with glass fibers longitudinally twisted.
The altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility (-10⁰C) and durability.
MIDA STANDARD P and PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
MIDA STANDARD PA and MIDA STANDARD VA membranes are delivered with mineral granules superior finish. This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application.
The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
MIDA STANDARD P and MIDA STANDARD V membranes are manufactured with PE film or sand finish on the upper face.
MIDA STANDARD membrane’ bottom is protected by a polyethylene film which prevents sticking when rolling and which melts during flame welding.
Usable domains: for medium and high complexity works, flat and curved steel frame roofs, hydraulic structures, etc.
| Products | ||
| -10⁰ SBS | MIDA STANDARD PV S3 SBS | P 3.0 mm |
| -10⁰ SBS | MIDA STANDARD PV S3 SBS | P 4.0 mm |
| -10⁰ SBS | MIDA STANDARD V70 S30 SBS | V 3.0 kg |
| -10⁰ SBS | MIDA STANDARD V70 S40 SBS | VA 4.0 kg |
SBS -15
POLYELAST is a range of membranes based on distilled bitumen modified with elastomeric polymers (SBS) and thermo-adherent additives. The reinforcement is made out of polyester (P) reinforced with glass fibers longitudinally twisted.
The altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility (-15⁰C) and durability.
POLYELAST P si PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
POLYELAST PA membranes are delivered with mineral granules superior finish. This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application.
The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
POLYELAST P membranes are manufactured with PE film or sand finish on the upper face.
POLYELAST membrane’ bottom is protected by a polyethylene film which prevents sticking when rolling and which melts during flame welding.
Usable domains: for medium and high complexity works, flat and curved steel frame roofs, hydraulic structures, etc.
| Products | |||
| -15⁰ SBS | POLYELAST | P 4.0 mm | (5.2 kg) |
SBS -20
MIDA is a range of membranes based on distilled bitumen modified with elastomeric polymers (SBS) and thermo-adherent additives. The reinforcement is made out of polyester (P) reinforced with glass fibers longitudinally twisted.
The altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility (-20⁰C) and durability.
MIDA P si PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
MIDA PA membranes are delivered with mineral granules superior finish.
This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application. The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
MIDA P membranes are manufactured with PE film or sand finish on the upper face.
MIDA membrane’ bottom is protected by a polyethylene film which prevents sticking when rolling and which melts during flame welding.
Usable domains: for medium and high complexity works, flat and curved steel frame roofs, hydraulic structures, etc.
| Products | |||
| -20⁰ SBS | MIDA BASE PV S4 | P 4.0 mm | (5.0 kg) |
| -20⁰ SBS | MIDA TOP PV S4 | PA 4.0 mm | (5.4 kg) |
| -20⁰ SBS | MIDA FIX BASE | P 2.6 mm | |
| -20⁰ SBS | MIDA FIX ROOF | P 1.5 mm | |
| -20⁰ SBS | MIDA TOP PV200 S5 | PA 5.2 mm | (6.7 kg) |
SBS -25
POLYELAST EXTRA is a range of membranes based on distilled bitumen modified with elastomeric polymers (SBS) and thermo-adherent additives. The reinforcement is made out of polyester (P) reinforced with glass fibers longitudinally twisted or interweaved fiberglass mat (V).
Altered composition of the membrane offers excellent aging properties, adhesion, elasticity, cold flexibility (-25⁰C) and durability.
POLYELAST EXTRA P and PA membranes have excellent mechanical properties due to the nature of polyester reinforcement and its reinforced network.
POLYELAST EXTRA PA membranes are delivered with mineral granules superior finish.
This finish is designed to protect the membrane from UV rays and in the same time to enhance the aesthetic application. The membrane is provided with 10 cm overlapping edge and 15 cm end edges which overlap.
POLYELAST EXTRA P membranes are manufactured with PE film or sand finish on the upper face.
POLYELAST EXTRA membrane’ bottom is protected by a polyethylene film which prevents sticking when rolling and which melts during flame welding.
Usable domains: for high complexity works, flat roofs and curved steel frame, hydraulic structures where strength and flexibility are imperative.
| Products | |||
| -25⁰ SBS | POLYELAST EXTRA | P 4.0 mm | (5.2 kg) |
| -25⁰ SBS | POLYELAST EXTRA 5 | P 5.0 mm | (6.5 kg) |
| -25⁰ SBS | POLYELAST EXTRA TR 5 DESIGN | PA 5.2 mm | (6.7 kg) |
| -25⁰ SBS | POLYELAST EXTRA TR DESIGN | PA 4.2 mm | (5.2 kg) |
SBS self-adhesive
MIDA SELF is a membrane based on distilled bitumen modified with elastomeric polymers (SBS) and thermo-adherent additives. The reinforcement is made out of polyester (P) reinforced with glass fibers longitudinally twisted or longitudinal interweaved fiberglass mat (V). Membrane composition provides excellent adhesion properties, elasticity, cold flexibility (-15; -20⁰C), durability and mechanical strength.
SELF MIDA membranes are manufactured with PE film hot-melt finishing on the upper face.
Overlappable edges and side seating surface of the membrane is protected by a removable silicone film which should be removed before its usage.
Usable domains: waterproofing thermosensitive surface – expanded or extruded polystyrene, or wood.
MIDA SELF is applied by simply placing it in the polystyrene or wood support.
Membrane adhesion to the substrate will be achieved through the heat transfer resulting from:
– heat from the burner flame or hot air jet applied on top of the membrane
– heat from the burner flame or hot air jet while applying the final layer of waterproofing.
| Products | ||||
| -15⁰ SBS | MIDA SELF EPS | V 2.0 mm | self-adhesive | |
| -15⁰ SBS | MIDA SELF PV S 2,0 s | P 2.0 mm | (2.9 kg) | self-adhesive |
| -20⁰ SBS | MIDA SELF GV S3 | V 2.7 mm | (3.5 kg) | self-adhesive |
SBS vapour barrier
MID TERM allows are easier and significantly faster to apply due to the THERM bands compared to sealable vapor barrier membranes. The insulation allows an easy and quick application – without additional adhesive. This saves time and material. The sticking properties of special bitumen THERM strips are activated immediately without time intensive melting of the bitumen mass. This means: activation, alignment, pressing, ready to go!
| Products | ||||
| -20⁰ SBS | MIDA THERM Top PV S5 | P 6.3 kg | (5.2 mm) | vapour barrier |
SBS green
POLYELAST EXTRA GREEN is a range of membranes based on distillate bitumen modified with polymer elastomers (SBS), reinforced with a composite mat made out of polyester (P).
The bituminous substance is additived with specific substances which prevent root penetration in the membrane structure. These embedded substances withstand high temperatures generated by the heating of the membrane surface with the flame, do not migrate into the soil and are not washed by water.
Altered composition of the membrane offers excellent aging properties, elasticity, cold flexibility (-25⁰C), durability and strength using a suitable polyester reinforcement.
EXTRA GREEN P POLYELAST membranes are manufactured with sand finishing or PE foil on top.
EXTRA GREEN POLYELAST PA membranes are delivered with superior finishing of mineral grains.
POLYELAST EXTRA GREEN membranes’ bottom is protected with a polyethylene sheet that prevents sticking when beeing rolled and which melts during the blistering flames. Proper temperature application can be controlled just by looking for the disappearance of the stamped marks in the contact surface of the membrane.
Usage: EXTRA GREEN POLYELAST membranes are used for waterproofing buried structures (tunnels, hydraulic works, foundations, hanging gardens, etc.).
| Products | |||
| -25⁰ SBS | POLYELAST EXTRA 4/1 Green | P 4.0 mm | (5.2 kg) |
| -25⁰ SBS | POLYELAST EXTRA DESIGN 4/1 Green | PA 4.0 mm | (5.2 kg) |
| -25⁰ SBS | POLYELAST EXTRA DESIGN 5/1 Green | PA 5.0 mm | (5.8 kg) |
Auto parts plant
Location
Adress: In the are of the industrial park
City: Budesti
County: Valcea
Zone: South-West
Beneficiary FAURECIA SEATING
Adress: DN 7, km 258+836
City: Talmaciu
County: Sibiu
Applicator WDP DEVELOPMENT RO
Adress: Baia de Arama 1 St.
City: Bucuresti
Products that have been used:
- Stone wool
- TECHNOROOF – 1700 m3
- Area: 12 000 m²
Tessutica’ industrial hall extension
Location
Adress: 42 plot, West Park
City: Aricestii Rahtivani
County: Prahova
Zone: South
Beneficiary ALLIANSO IMMOB PROJECT SEVEN
Location: Aricestii Rahtivani
County: Prahova
Products that have been used:
- Stone wool
- TECHNOROOF – 2200 m3
- Area: 19 000 m²
Thermal insulation system panels – contact facades
Thermal insulating the external walls of a building is a quick way of reducing costs, increasing contribution to environmental protection and energy saving.
Correctly designing the exterior walls of the structure significantly affects the environment inside the building. The conventional single-layered (homogeneous) exterior walls are not the appropriate solution to ensure the current thermal insulation requirements.
A multi-layered structure is recommended for new buildings and for rehabilitation – an additional system for thermal insulation.
Quality insulation has a great importance for rehabilitation. The most common method of isolation is Thermo Insulating System (through contact) where special wool based products are used.
The advantages of using high-quality Technonicol materials:
- saving energy for heating, which is reflected in financial savings
- protecting the interior from overheating
- supporting structure protection from external factors
- avoiding thermal bridges
- fireproofing class – A1
- maximize the heat conversion, an ‘A’ energy class can be obtained through isolation
- high sound absorption, class A sound absorption
Ceilings
Ceilings have a wide variety of functions and must meet a range of technical construction parameters. For these, in addition to mechanical resistance and stability, legal directives stipulate requirements for thermal / acoustic insulation and fire resistance.
Products
Exterior walls – ventilated facades
Ventilated facade is a façade with an airated space that allows continuous wall ventilation, ensuring the stability of the entire structure from moisture.
In order to keep the interior heated or cool, the outer wall and structure are very important, the structure also taking part on the structural load-bearing of the building.
These aspects can be combined in the most efficient way by using Technonicol materials, which includes a wide range of possible solutions, with relatively low costs in terms of maintenance and installation.
Wool products are strongly recommended to isolate ventilated facades.
Products
Partitioning walls
The interior walls have a wide variety of functions and must meet a range of technical parameters of construction. The most widespread are separation walls – non-movable walls, light, made out of plasterboard, which are not part of the backbone of the house – over which a mineral fiber material is applied. For these walls, in addition to mechanical resistance and stability, legal directives stipulate requirements for thermal and acoustic insulation and fire resistance.
Technonicol insulation materials in combination with a system of drywall, provides a wide range of alternatives that could achieve excellent parameters in terms of soundproofing Index (Rw airborne sound reduction), insulation (heat transfer U coefficient) and fire resistance (EI).
Technonicol materials can be used for new installations or additional filler for new or existing partition. Applying Technonicol insulation materials on partitioning walls improve the soundproofing, thermal insulation and fire protection properties.
Products
Floors
The impact sound generated by walking, moving chairs, use of household appliances in contact with the floor, are a source of very unpleasant noise that residents often complain in multi-family buildings. Thus, the insulation against impact sound is certainly one of the important parameters of home comfort.
A floating floor is the main structure to solve the problems generated by the impact sounds in construction.
Floating floor structure usually includes an insulating layer applied over the elastic structure subjected to heavy loads and a protective layer applied over it. Depending on the type of materials used in the protective layer there are two methods to build a floating floor structure:
– The “wet” pour as a protective layer of cement screed
– The “dry” protective layer consists of a slight floor plate (chipboard, plasterboard, etc.)
Products
Terrace roof – no traffic
Compliance and appropriate design of a flat roof has beneficial effects on the life of the building and reduce energy losses. This project should be done by specialists that will take into account the factual conditions of the building. The main part of building a flat roof is the optimal design and building proper thermal insulation and protection against influences of external factors. The optimal thickness and method of thermal insulation are based on heat loss calculation. The calculation provide also of the degree of condensation of water vapor, which, subsequently, will determine the type of film used as a water vapor barrier.
For flat roofs, it is recommended to use hard materials with adequate compressive strength. Rigid roof plates made from mineral wool are designed for the following structures:
– Steel structured roofs with trapezoidal profiles, monolithic concrete, precast or other supporting structures with mechanical anchoring or with adhesive (new or repaired)
– Roofing insulation panels
– Extensive green roofs with vegetation cover (with load up to 400 kg / sqm).
Technonicol wool products are suitable for various structural variants of terrace roofs. Different types exhibit excellent features regarding fire safety, heat transfer and soundproofing. Each product has different and unique characteristics which are suited for a particular use. It is therefore important to use the product for the type of flat roof traffic: traffic, no traffic or occasional traffic.
Products
Bitumen membrane, PVC membrane , TPO/FPA membrane, Vapour barrier
Terrace roof – traffic
Compliance and appropriate design of a flat roof has beneficial effects on the life of the building and reduce energy losses. This project should be done by specialists that will take into account the factual conditions of the building. The main part of building a flat roof is the optimal design and building proper thermal insulation and protection against influences of external factors. The optimal thickness and method of thermal insulation are based on heat loss calculation. The calculation provide also of the degree of condensation of water vapor, which, subsequently, will determine the type of film used as a water vapor barrier.
For flat roofs, it is recommended to use hard materials with adequate compressive strength. Rigid roof plates made from mineral wool are designed for the following structures:
– Steel structured roofs with trapezoidal profiles, monolithic concrete, precast or other supporting structures with mechanical anchoring or with adhesive (new or repaired)
– Roofing insulation panels
– Extensive green roofs with vegetation cover (with load up to 400 kg / sqm).
Technonicol wool products are suitable for various structural variants of terrace roofs. Different types exhibit excellent features regarding fire safety, heat transfer and soundproofing. Each product has different and unique characteristics which are suited for a particular use. It is therefore important to use the product for the type of flat roof traffic: traffic, no traffic or occasional traffic.
Products
Bitumen membrane, PVC membrane , TPO/FPA membrane, Vapour barrier
Terrace roofs – occasional traffic
Compliance and appropriate design of a flat roof has beneficial effects on the life span of the building and also reduce energy losses. The project should be done by only specialists that will take into account the factual conditions of the building. The main part of building a flat roof is the optimal design and building proper thermal insulation and protection against influences of external factors. The optimal thickness and method of thermal insulation are based on heat loss calculation. The calculation provide also of the degree of condensation of water vapor, which, subsequently, will determine the type of film used as a water vapor barrier.
For flat roofs, it is recommended to use hard materials with adequate compressive strength. Rigid roof plates made from mineral wool are designed for the following structures:
– Steel structured roofs with trapezoidal profiles, monolithic concrete, precast or other supporting structures with mechanical anchoring or with adhesive (new or repaired)
– Roofing insulation panels
– Extensive green roofs with vegetation cover (with load up to 400 kg / sqm).
Technonicol wool products are suitable for various structural variants of terrace roofs. Different types exhibit excellent features regarding fire safety, heat transfer and soundproofing. Each product has different and unique characteristics which are suited for a particular use. It is therefore important to use the product for the type of flat roof traffic: traffic, no traffic or occasional traffic.
Products
Bitumen membrane, PVC membrane , TPO/FPA membrane, Vapour barrier
Pitched roofs
Pitched roofs are the most common solution for residential buildings, but are also frequently used in nonresidential construction. However 20% of a home’s energy loss is due to the roof.
Pitched roof Technonicol insulation materials bring major benefits: increasing the index of thermal and sound insulation, fire protection, durability and easy application.
The main purpose of thermal insulation of pitched roofs is protection against external effects – rain, snow and wind. The slope provides rainwater and melted snow drainage. The size of the slope varies according to the specific requirements of the type of coating.
Current requirements for thermal performance of buildings, stability for summer / winter conditions, fire safety and noise protection, forces a proper design and installation of insulation in pitched roofs. The insulation can be mounted in several ways: over rafter, between rafters and under rafters.
Products
International fair – Construct Expo 2014
SC Rikko STEEL SRL participated during 10-13 April 2014 at the XXI edition of “Construct Expo” – International Fair of technology, machinery and equipment for construction, which was attended by 125 exhibitors from Romania and abroad and which spaned over an area of 8,900 square meters. On this occasion, those who visited the Rikko Steel stand had the opportunity to watch and discuss the exhibited products, new products and talk directly with specialists from Ivano-Frankovsk and the PLUVITEC CEMENT.